• Introducing the REVOLIFT Permanent Lifting Magnet 14th May 2024

    After years of experience with our top quality Neolift permanent lifting magnet. We are introducing the new product from Walmag Magnetics the Revolift – perfect for everyday steel handling.  Walmag Magnetics have spent years creating this new concept of the future of permanent lifting magnets.  

    Please contact us to find out more about this product range. 

  • Upcoming Event – IFAT 2018 3rd April 2018

    Our Partners Bakker Magnetics BV will be attending IFAT 2018. IFAT 2018 will be held in Munich from May 14th-18th 2018.  You are welcome to visit the Bakker Magnetics Stand 422 in hall B6

    IFAT is the world’s leading trade fair for water, sewage, waste and raw materials management and is a place where visitors can find strategies and solutions to improve production process and to help make more efficient use of raw materials.

    Our staff on the stand have knowledge of all our products including the BM104X eccentric Eddy Current which is equipped with the best magnetic rotor in the market today. The high speed magnetic rotor of this machine generates an astonishing field frequency of 1,56kHz which makes it extremely suitable for separating very fine particles. It’s for example used in bottom ashes and electronics recycling where we achieved some excellent results.

    If you are unable to attend IFAT but would like further information on the BM104X Eddy Current or more information on any of our other products then you can contact us at or on 01525 372714

    High Intensity Drum Magnet Leaflet

    BM104X Eddy Current Leaflet

  • RWM 2017 4th September 2017

    Being the sole UK agents for Bakker Magnetics BV, Liquisort Metals BV,  Lift Hold & Separate will be attending RWM 2017 at the NEC Birmingham on 12th – 14th September.  We will be on stand 5N80 and available to discuss your requirements.

    The exchange of knowledge between us, Bakker Magnetics and Liquisort Metals means we can provide Recycling & Separation Magnets for separating ferrous and non-ferrous material in all types of recycling applications and also for extracting ferrous parts from food, beverage and product flows to offer bespoke systems built to your specifications.

    This enables us to provide a unique service to our customers and offer bespoke solutions as well as standard products.  We work hard as a company to develop our products and services in this dynamic market.  It is a challenge in this economic climate, but we are confident we offer superior products at competitive prices.

  • BUX NEO – New Capacity Launch 13th March 2017

    The BUX NEO range capacity has increased! Now the BUX NEO permanent lifting magnet range is available from 150kg – 2000kgs.

    The only magnet to safely lift thin plate:

    • NEO150 = 2mm
    • NEO300 = 4mm
    • NEO600 = 6mm
    • NEO1000 = 10mm
    • NEO2000 = 15mm

    Higher capacity lifting magnets

    •  Extra strong charged neodymium magnets
    •  Higher capacity while keeping the original parameters
    •  Easy Switch technology

    Original BUX design

    •  Ergonomic design solution
    •  Robust body
    •  Just two screws in recess

    Highest quality and maximum security

    • Safety factor 3+
    • Piece-by-pice tear-off test on air gap – real conditions simulation
    • AIR GAP TEST trademark
    • LOLER test, service, repair and spares available.


    Tremendous lifting capacity thanks to high energy Neodymium magnets
    Suitable for both flat and round material
    Easy activation of the magnet
    Safety factor at least 3:1 – break away test carried out with an air gap
    Robust construction ensures high durability even under harsh conditions
    Designed for materials up to 80 °C


    In all sectors of the metal working industry
    In the workshop to load, unload machine tools
    At constructions sites to lift plates, beams and weld fabrications
    In the warehouse to handle plate and bar stock.

    Contact us for more information using our contact us link, call 01525 372714 or email

    NEO Lifting Chart 2017 150 -2000kgs

    BUX NEO Leaflet 150-2000 Capacity

  • RWM 2016 12th August 2016

    RWM 2016

    RWM is fast approaching – 13-15 SEPTEMBER RWM at NEC BIRMINGHAM

    RWM is the leading event for sourcing new products, getting industry insight and networking with your peers. Here are a few reasons to attend:
    • Discuss the impact of the EU referendum result on the waste management industry with your colleagues and peers
    • View the latest products from exhibitors including Viridor, SITA, Novelis, Stobart, Mercedes and Lift Hold & Separate.
    • Hear from top speakers from Kingfisher, Rolls-Royce, ESA, The Resource Association, The Green Investment Bank and more.

    Lift Hold and Separate always commit to attend RWM with Bakker Magnetics as its such a great event and well attended – It gives us the chance to catch up with current customers and speak to new ones!  We can discuss our product range as well as forthcoming products, new technology and ideas.

    Why not use the following link to register to attend and pop along to see us at Hall/Stand 5R130.   Register to attend RWM 2016

    DSC05112 DSC05114 IMG_0267

  • RWM – NEC Birmingham 22nd July 2016

    RWM is Europe’s premier event for resource efficiency and waste management solutions. It is the only event of its kind, asked for by the industry, covering all aspects of the waste hierarchy. In partnership with CIWM spans each element of the industry and is shaped around the demands of this rapidly growing sector.  Lift Hold and Separate exhibit at RWM every year where we proudly represent both Bakker Magnetics and Liquisort Metals in the UK, this exchange of knowledge means we can provide Recycling & Separation Magnets for separating ferrous and non-ferrous material in all types of recycling applications and also for extracting ferrous parts from food, beverage and product flows to offer bespoke systems built to our customer’s specifications.

    RWM 2015 saw more exhibitors doing business at the show than ever before – with many companies taking orders on their stands at the NEC. In addition, record numbers of waste producers and local authorities were in attendance to source new suppliers and equipment.

    We look forward to being at the NEC Birmingham on  13 – 15 September 2016 – why not come and join us.
    Show Dates                                         Show Times
    Tue 13 September 2016                     09.30 – 17.30
    Wed 14 September 2016                   09.30 – 17.30
    Thu 15 September 2016                    09.30 – 16.00

    Machine all ready for RWM
    Machine all ready for RWM Stand.